Table of Contents
Every year, 120K+ torch-related accidents occur due to improper use. Whether you’re camping, handling emergencies, or fixing home appliances, these 17 evidence-backed rules will keep you safe while maximizing your light’s potential.
🔋Battery & Power Section
✅ DO:
- Rotate batteries monthly in infrequently used torches to prevent corrosion
- Mix chemistries wisely: Combine lithium (cold weather) with NiMH (high-drain devices)
- Store at 40% charge in cool, dry places to preserve capacity (Studies show 85% retention after 1 year)
❌ DON’T:
- Ignore swelling batteries – Dispose immediately (1 swollen cell = 20x explosion risk)
- Use damaged chargers – Causes overcharging (leading to 79% of battery fires)
- Leave alkaline batteries inside unused devices – Leaks corrode terminals in <6 months
🌲Outdoor & Adventure Protocols
✅ DO:
- Waterproof test before trips: Submerge for 30 mins with rice inside – any moisture=FAIL
- Signal SOS properly: 3 short flashes → 3 long → 3 short (universal recognition)
- Carry redundancy: Main torch + keychain backup (80% of lost hikers cite light failure)
❌ DON’T:
- Stare at reflective surfaces – Snow/sand reflections cause temporary night blindness
- Depend solely on phone lights – 300% less runtime vs. dedicated torches
- Leave headlamps on red mode in bear country – Attracts predators
🆘Emergency Scenarios: Critical Rules
| Situation | DO | DON'T |
|---|---|---|
| Power Outage | Preserve battery: 5 sec bursts only | Drain all cells searching |
| Car Breakdown | Place torch 20m behind car (alerting) | Directly shine at approaching cars |
| Medical Night | Use diffuser for wound inspection | Contaminate with blood on lens |
🛠️Maintenance & Handling
Microfiber cleaning prevents 90% of lens damage
Cleaning Do’s:
- Monthly contact point scrub with isopropyl alcohol (restores conductivity)
- O-ring lubrication with silicone grease (not petroleum-based!)
- Lens polishing using toothpaste for UV protection renewal
💡Technology-Specific Warnings
- LED Torches: Avoid ceiling bounces >10 mins – Thermal throttling damages drivers
- Tactical Models: Remove batteries before holstering (prevents accidental discharge)
- USB-C Charging: Use only 5V/1A bricks – Fast chargers fry circuitry
Final Checklist
Before critical use, verify:
- Beam focus works smoothly
- Mode transitions without flickering
- Battery indicator accuracy (Test voltage with multimeter)
Why Choose Us?
Export Market Distribution
FAQ
Are you a manufacturer or trading company?
We are DP group, listed company and high-tech enterprise in China, with 4 factories of intelligent manufacturing covering 350,000 square meters. We specialize in LED flashlight, emergency lighting, and other lighting products for over 20 years.
How do you control the products quality?
We will check the products one by one before the bulk packing.
What is your method of payment?
Various payment methods are available, including via PayPal, Visa, MasterCard, Alibaba Trade Assurance and T/T.
30% deposit upon confirmation of the order, 70% balance before shipment or at sight of B/L Copy.
How long does it take to manufacture once an order has been placed?
lt depends on the volume of the order. For most online wholesales orders, we ship within 7 days after we receive the payment.
Is it possible to put our logo on your product or packaging?
Of course, we have a factory that welcome to customize such as your brand, logo, color, product manual, packaging and so on.
Can I come to China to visit your factory?
Welcome to visit our factory in Zhaoqing City, Guangdong, China, and our office in Guangzhou City, Guangdong, China.
